Double sided, clamps itself and your work.
This clamp will hold itself down, then it will clamp your workpiece.
Now you can use your Vac-Clamp whenever you want wherever you want.
A VC5 kit contains:-
One VC5 clamp.
Air supply tube with a 1/4″ pneumatic connection.3 piece spare seal/gasket set.
Instruction book.Link to Instruction Book
| What are the advantages? The VC5 has two vacuum generators built into the clamp body, one for each side. This means that the clamp will hold itself down on a flat non porous surface, and clamp your workpiece. Naturally enough it will work at any angle |
| How? Ambient air pressure is the clamping force. Air pressure at sea level is about 1kg per square centimetre (about 14.7 psi). So a clamp using the full face can exert a holding force of up to 150kg (330lbs). Smaller areas will give less clamping force |
| What if I am...
At higher altitudes air pressure is less which means the holding force of a vacuum clamp reduces with altitude.If you intend to work at the summit of Mount Everest (8,854metres, 29,028ft) the holding force will be reduced from 150kg (330lbs) to 50kg force (110lbs) |
Comments are closed, but trackbacks and pingbacks are open.